3. Operation
CAUTION! The lamp must not be covered by thermal insulation or
other materials. Do not touch the illuminant within 30 minutes after
operation.
NOTICE! Only switch on the lights while the appliance is operating. Do not
switch on the lights to lighten the room.
3.1 Control panel
On/off.
Touch to increase the speed.
When you touch the
operating, the speed is set to level 4. After 5 minutes, the speed is reset to
level 3 automatically.
Touch to decrease the speed.
Light.
The digital display indicates:
1 for low speed.
2 for medium speed.
3 for high speed.
3.2 Quick timer
1. Touch
and
2. The display will flash and the 5-minutes-countdown begin.
3. After 5 minutes, the motor und the light will be turned off automatically; an
acoustic signal will sound for 1 second.
key for more than 1 second while the appliance is
for 1 second.
40