Makita DUH481 Bedienungsanleitung Seite 4

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. Check button
4-1. Switch trigger A
4-2. Switch trigger B
4-3. Lock-off button
5-1. Indication lamp
8-1. Trimming direction
8-2. Hedge surface to be trimmed
8-3. Tilt the blades
9-1. String
SPECIFICATIONS
Model
Blade length
-1
Strokes per minute (min )
Rated voltage
Overall length
Net weight
Battery cartridge
Battery charger
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Do not expose to rain.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of the European Directives,
on Waste
Equipment
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
Explanation of general view
13-1. Press
13-2. Chip receiver
13-3. Nut
13-4. Shear blade
14-1. Hooks
14-2. Fit the hooks into groove
14-3. Grooves
15-1. Press the levers on both sides
15-2. Unlock the hooks
16-1. Screws
16-2. Under cover
17-1. Screws
17-2. Sponge
17-3. Washer
DUH481
480 mm
D.C. 14.4 V
869 mm 881 mm
2.9 kg 3.1 kg
BL1430 /
BL1415 /
BL1440 /
BL1415N
BL1450
Electric and Electronic
and Batteries
DUH483
1,350
D.C. 18 V
873 mm 888 mm
3.0 kg 3.2 kg
BL1830 /
BL1815 /
BL1840 /
BL1815N /
BL1840B /
BL1820 /
BL1850 /
BL1820B
BL1850B
DC18RC, DC18SD
END013-4
Intended use
The tool is intended for trimming hedges.
Noise
The typical
according to EN60745:
Model DUH481,DUH483,DUH521
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
and
Model DUH523
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
4
18-1. Gear
18-2. Sleeves
18-3. Washer
18-4. Groove
19-1. Blade cover
21-1. Grease
22-1. Grease
23-1. Blade
23-2. Sponge
23-3. Sleeves
24-1. Screws
24-2. Washer
25-1. Screws
DUH521
520 mm
D.C. 14.4 V
919 mm 931 mm
3.0 kg 3.2 kg
BL1430 /
BL1415 /
BL1440 /
BL1415N
BL1450
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
A-weighted noise
) : 75 dB (A)
pA
) : 77 dB (A)
pA
DUH523
D.C. 18 V
923 mm 938 mm
3.0 kg 3.3 kg
BL1830 /
BL1815 /
BL1840 /
BL1815N /
BL1840B /
BL1820 /
BL1850 /
BL1820B
BL1850B
ENE014-1
ENG905-1
level determined