IKEA SMAKSAK AA-2335948-1 Bedienungsanleitung Seite 10

ENGLISH
How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
How to use: Pyrolytic Cleaning
Warning! The oven becomes very
hot. There is a risk of burns.
Warning! Ensure that any pets
(especially birds) are taken as far
as possible from the vicinity of the
appliance location during and
after the Pyrolytic cleaning and
first use maximum temperature
operation. Keeping them in a
different room would be the
preferred option during the
pyrolytic cycle and until appliance
has cooled down again to room
temperature. Good ventilation
has to be provided during and
after (till appliance cool down)
operations of the pyrolytic cycle
and first maximum temperature
use cycle.
To download the full version visit www.ikea.com
1
Warning! Before carrying out a
Pyrolytic self-cleaning function or
the First Use, please remove from
the oven cavity:
• Any excess food residues, oil
or grease spills / deposits.
• Any removable objects
(including shelves, side rails /
telescopic runners, etc.
provided with the product)
particularly any non-stick pots,
pans, trays, utensils etc.
Caution! Do not use the hob at
the same time as the Pyrolysis
function. It can cause damage to
the oven.
Before you turn on the Pyrolysis:
• remove all the accessories and removable
shelf supports.
• clean the oven floor with warm water and
mild detergent.
• clean the inner door glass with warm
water and soft cloth.
2
10