Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
2. When the display shows P1, press
start the procedure.
You can use the End function to delay the
start of the cleaning.
During the Pyrolysis the oven lamp is off.
Time of the procedure: 1 h 30 min.
3. When the oven is at the set temperature,
the door locks. The display shows
Do not open the door before the
procedure completes. This will
abort the procedure. When the
oven cools down, the door
automatically unlocks.
4. When Pyrolysis is completed, the display
shows the time of day. The oven door
stays locked. When the oven is cool
again, the signal sounds and the door
unlocks.
How to remove and install: Door
The oven door has three glass panels. You can remove the oven door and the internal glass
panels to clean them. Read the whole "Removing and installing door" instruction before you
remove the glass panels.
Caution! Do not use the oven without the glass panels.
Step 1
Open the door fully and hold both
hinges.
Step 2
Lift and pull the latches until they
click.
.
To download the full version visit www.ikea.com
To stop Pyrolysis before it is
to
completed, turn the knob for the
oven functions to the off position.
Cleaning reminder
To remind you that the pyrolysis is
necessary, PYR flashes in the display for 10
seconds after each activation and
deactivation of the oven.
The cleaning reminder goes
out:
• after the end of the pyrolysis.
• if you press
same time while PYR flashes in
the display.
11
and
at the
Werbung
Inhaltsverzeichnis
