Technical Specifications - Bose AMM108 Produktanleitung

Installation / Technical Information
Suspension
WARNING: To ensure safe product installation and usage, it is the installer's responsibility to refer to the previous
Installation Guidelines section and the user documentation of all mounting components before installing the
product.
To suspend the loudspeaker from the ceiling, attach M10 threaded eye bolts to the two M10 threaded attachment points
on the bottom panel of the loudspeaker. Use only load-rated eye bolts intended for lifting (per ASME B30.26).
For easier adjustment of the angle, use the AMM Suspension Bracket (843344-0010). To access
documentation for the AMM Suspension Bracket, scan the QR code or visit pro.Bose.com/ammsbracket.
If you are using a custom-designed mounting or suspension system or hardware, a licensed professional
engineer must review the design and fabrication. Obtain all mounting or suspension system components
from reputable manufacturers.
Bottom View
q
Processor Presets
Use only approved Bose Professional loudspeaker
presets. The presets listed here are available when
using Bose Professional PowerMatch amplifiers.
For a complete list of products that support
Bose Professional AMM loudspeaker presets visit
PRO.BOSE.COM.

Technical Specifications

Coverage
Tilt-back Angle
IP Rating
Connectors
Power Handling
Nominal Impedance
Dimensions
(height × width × depth)
Net Weight
6 • English
w
M10 ×2
110° horizontal × 60° vertical
35°
IP43 (front-of-house position only)
2 × Neutrik® NL4 inputs
Passive: 150 W (RMS), 2400 W (peak)
Passive: 8 Ω
31.8 cm × 31.8 cm × 26.8 cm (12.5 in × 12.5 in × 10.5 in)
13.04 kg (28.75 lb)
q
Application
Main Loudspeaker
Main Loudspeaker + Subwoofer
Stage Monitor
Passive:
Pin 1+: FR+
Pin 1−: FR−
Pin 2+: Not connected
Pin 2−: Not connected
PRO.BOSE.COM
w
Preset Name
AMM108(FR)
AMM108(FR) + AMS115-sub
AMM108(MON)
Bose AMM108 • Product Guide