Technical Specifications - Bose AMM112 Produktanleitung

Installation / Technical Information
Suspension
WARNING: To ensure safe product installation and usage, it is
the installer's responsibility to refer to the previous Installation
Guidelines section and the user documentation of all
mounting components before installing the product.
To suspend the loudspeaker from the ceiling, attach M10 threaded eye
bolts to the two M10 threaded attachment points on the top or bottom
panel of the loudspeaker. Use only load-rated eye bolts intended for
lifting (per ASME B30.26).
For easier adjustment of the angle, use the
AMM Suspension Bracket (843344-0010). To access
documentation for the AMM Suspension Bracket, scan
the QR code or visit pro.Bose.com/ammsbracket.
If you are using a custom-designed mounting or
suspension system or hardware, a licensed professional
engineer must review the design and fabrication. Obtain
all mounting or suspension system components from
reputable manufacturers.
Processor Presets
Use only approved Bose Professional loudspeaker presets. The presets
listed here are available when using Bose Professional PowerMatch
amplifiers.
For a complete list of products that support Bose Professional AMM
loudspeaker presets visit PRO.BOSE.COM.

Technical Specifications

Coverage
Tilt-back Angle
IP Rating
Connectors
Power Handling
Nominal Impedance
Dimensions
(height × width × depth)
Net Weight
6 • English
110° horizontal × 60° vertical
35°
IP43 (front-of-house position only)
2 × Neutrik® NL4 inputs
Passive: 300 W (RMS), 2800 W (peak)
Bi-amp, LF: 300 W (RMS), 2800 W (peak)
Bi-amp, HF: 45 W (RMS), 720 W (peak)
Passive or bi-amp, LF/HF: 8 Ω
47.7 cm × 47.7 cm × 38.3 cm (18.0 in × 18.0 in × 15.0 in)
22.04 kg (48.60 lb)
Top View
Application
Main Loudspeaker
Main Loudspeaker +
Subwoofer
Stage Monitor
Passive:
Pin 1+: FR+
Pin 1−: FR−
Pin 2+: Not connected
Pin 2−: Not connected
PRO.BOSE.COM
M10 ×2
q w
q
w
Preset Name
AMM112(FR)
AMM112(LF)
AMM112(LF90)
AMM112(HF)
AMM112(FR)
AMM112(90)
AMM112(LF)
AMM112(LF90)
AMM112(HF)
AMM112(MON)
AMM112(90-MON)
AMM112(LF-MON)
AMM112(LF90-MON)
AMM112(HF-MON)
Bi-amp:
Pin 1+: LF+
Pin 1−: LF−
Pin 2+: HF+
Pin 2−: HF−
Bose AMM112 • Product Guide