Handling The Equipment; Care And Maintenance; List Of Spare Parts - Kettler OPTIMA 100 Montageanleitung

200403 Manual 1021a OPTIMA 100 de,en,fr_selec HB 02.04.2020 15:31 Seite 5
– EN –
• The fastening material required for each assembly step is shown in the
diagram inset. Use the fastening material exactly as instructed. The required
tools are supplied with the equipment.
• Bolt all the parts together loosely at first, and check that they have been
assembled correctly. Tighten the locknuts by hand until resistance is felt,
then use spanner to finally tighten nuts completely against resistance (locking
device). Then check that all screw connections have been tightened firmly.
Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
• For technical reasons, we reserve the right to carry out preliminary assembly
work (e.g. addition of tubing plugs).

Handling the equipment

• Before using the equipment for exercise, check carefully to ensure that it
has been correctly assembled.
• It is not recommended to use or store the apparatus in a damp room as this
may cause it to rust. Please ensure that no part of the machine comes in
contact with liquids (drinks, perspiration etc.). This may cause corrosion.
• The machine is designed for use by adults and children should not be
allowed to play with it. Children at play behave unpredictably and dangerous
situations may occur for which the manufacturer cannot be held liable. If, in
spite of this, children are allowed to use the equipment, ensure that they are
instructed in its proper use and supervised accordingly.
• The equipment is dependent of revolutions per minute.
• A slight production of noise at the bearing of the centrifugal mass is due to
the construction and has no negative effect upon operation. Possibly occurring
noise during reverse pedalling result from engineering and are absolutely
safe.
• The exercise cycle has a magnetic brake system. The braking system is
adjustable
• To operate correctly, the pulse function requires a minimum voltage of 2,7
volts (only for computers working with batteries).
• Before beginning your first training session, familiarize yourself thoroughly
with all the functions and settings of the unit.
List of spare parts page 23-24
When ordering spare parts, always state the full article number, spare-partnumber,
the quantity required and the S/N of the product (see handling).
Example order: Art. no. CT1021-100/ spare-part no. 68009914 / 1 pieces / S/N
....................
www.kettlersport.com
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose
of this article correctly and safely (local refuse sites).

Care and maintenance

• To ensure that the safety level is kept to the highest possible standard,
determined by its construction, this product should be serviced regulary
(once a year) by specialist retailers.
• Please ensure that liquids or perspiration never enter the machine or the
electronics.
• This manual can be downloaded from
www.kettlersport.com.
5