Output Circuit - AKG D 880M Bedienungsanleitung

1.6 D 880
Fig. 2: On/off switch
on D 880

2.1 Output Circuit

2.2 Connecting
the Microphone
to a Balanced
Fig. 3: Using a bal-
anced connecting
Refer to fig. 3.
14
Downloaded from www.Manualslib.com
1 Description
S
M
M S.
2 Interfacing
The microphone provides a balanced output on a 3-pin male
XLR connector:
You can connect the microphone either to a balanced or an
unbalanced microphone input.
Input
cable.
1. Use a commercial XLR cable such as the optional MK 9/10
from AKG.
The length of these cables does not affect audio quality.
2. Plug the female XLR connector on the microphone cable
into the male XLR connector on the microphone.
3. Plug the other connector on the microphone cable into the
desired microphone input socket on your mixer or amplifier.
manuals search engine
The D 880
electrical, and acoustic characteristics as
the D 880 M
module with a noiseless on/off switch. The
switch is recessed to prevent the micro-
phone being switched off unintentionally.
Pin 1: ground
Pin 2: hot
Pin 3: return
S has the same mechanical,
M
and features an XLR connector