Troubleshooting - Gold Note GIGLIO Bedienungsanleitung

| TROUBLESHOOTING

PROBLEM
Levelling the turntable.
Cleaning the turntable.
Motor heating.
Noise on startup.
CAUSE
|
The turntable is not
levelled.
|
The turntable is dusty or
requires cleaning.
|
The motor is too hot.
|
The turntable produces a
slight rubbing noise upon
startup.
15
SOLUTION
|
Use a spirit level to help
yourself and adjust the
levelling by screwing or
unscrewing the feet.
Unscrewing a foot increase
the height of that corner.
|
With EXTREME care use
ONLY very soft 100%
cotton cloth to sweep
dust and stains out.
Any acid, alcohol or not
extremely soft cloth will
irreversibly damage the
turntable fine aesthetic.
Only dry cloth is allowed.
|
AC synchronous motors
as the ones used by Gold
Note may warm up to 50°
Celsius without creating
any problem.
|
It is normal for the belt
to produce a slight noise
before the optimal speed
is reached.