Samsung Jet Bot VR30T85 Serie Benutzerhandbuch Seite 14

Safety information
• Always keep the Obstacle Sensor Window
and the Cliff Sensor Window clear.
- If foreign matter accumulates, sensors
may malfunction.
• Do not store the Jet Bot in a car.
• Be careful that the LiDAR sensor is not
exposed to a direct light such as sun light,
infrared light, etc.
- The direct light can affect the performance
of the LiDAR sensor.
• When carrying the Jet Bot, be careful not to
let it drop.
- The impact from the drop can affect the
operation or performance of the LiDAR
sensor.
• Do not look at the transmitting part (a
laser) of the revolving LiDAR sensor
horizontally.
• Be careful not to insert a tool such as a
chopstick into the revolving LiDAR sensor.
Otherwise, the LiDAR sensor may work
abnormally or malfunction.
• Before cleaning, remove objects which are
less than 9 cm height and are lightly on the
floor as the Jet Bot can push along them,
or the objects can be caught in the Jet
Bot's Spin Brush or Driving Wheels. (Fixed
objects can be detected by the Jet Bot
when its bumper is pressed and will avoid
them.)
• If oil such as cooking oil is on the floor, the
Jet Bot may become stationary because the
floor is slippery. Remove the oil first before
cleaning with the Jet Bot.
14 English