ASROCK Z690 AQUA OC Bedienungsanleitung Seite 43

ATX 12V Power
Connectors
(8-pin ATX12V1)
(see p.1, No. 1)
(8-pin ATX12V2)
(see p.1, No. 2)
Graphics 12V Power
Connector
Right Angle:
(6-pin GFX_12V1)
(see p.1, No. 27)
SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.1, No. 36)
8 5
4 1
SPI_DQ3
SPI_PWR
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ
1
SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2
This motherboard
provides two 8-pin ATX
12V power connectors. To
use a 4-pin ATX power
supply, please plug it along
Pin 1 and Pin 5.
*Connecting an ATX 12V
8-pin cable to ATX12V2 is
optional.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
This motherboard
provides a 6-pin Graphics
12V power connector.
* Install the PSU's power cable to
this connector when 4 graphics
cards are installed.
This connector supports SPI
Trusted Platform Module (TPM)
system, which can securely store
keys, digital certificates, pass-
words, and data. A TPM system
also helps enhance network
security, protects digital
identities, and ensures platform
integrity.
Z690 AQUA OC
39