ASROCK Z690 AQUA OC Bedienungsanleitung Seite 17

• 1 x CPU Fan Connector (4-pin)
* The CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)
* CPU_FAN2/WP_3A supports the water cooler fan of maxi-
mum 3A (36W) fan power.
• 6 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
Speed Control)
* The Chassis/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
* CPU_FAN2/WP_3A, CHA_FAN1~6/WP can auto detect if
3-pin or 4-pin fan is in use.
• 1 x 24 pin ATX Power Connector (Hi-Density Power
Connector)
• 2 x 8 pin 12V Power Connectors (Hi-Density Power
Connector)
• 1 x 6 pin 12V Power Connector (Hi-Density Power Connec-
tor)
• 1 x Front Panel Audio Connector (15μ Gold Audio
Connector)
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports
ESD Protection)
• 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports)
(ASMedia ASM1074 hub) (Supports ESD Protection)
• 2 x Front Panel Type C USB 3.2 Gen2x2 Headers (20 Gb/s)
(Support ESD Protection)
• 1 x Dr. Debug with LED
• 1 x Power Button with LED
• 1 x Reset Button with LED
• 1 x Retry Button
• 1 x Safe Boot Button
TM
• V-Probe : 4-set of onboard voltage measurement points laid
• Rapid OC Buttons: +/- buttons to adjust OC frequency
• 1 x Slow Mode Switch
• 1 x LN2 Mode Switch
• 1 x NickShih's OC Profile 1 Button with LED
• 1 x NickShih's OC Profile 2 Button with LED
• 1 x NickShih's OC Profile 3 Button with LED
Z690 AQUA OC
13