ASROCK Z690 AQUA OC Bedienungsanleitung Seite 41

Front Panel Type C USB
3.2 Gen2x2 Headers
(20-pin F_USB32_TC_1)
(see p.1, No. 19)
(20-pin F_USB32_TC_2)
(see p.1, No. 21)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, No. 42)
High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.
Chassis/Water Pump Fan
Connectors
(4-pin CHA_FAN1/WP)
(see p.1, No. 17)
(4-pin CHA_FAN2/WP)
(see p.1, No. 16)
(4-pin CHA_FAN3/WP)
(see p.1, No. 29)
(4-pin CHA_FAN4/WP)
(see p.1, No. 28)
USB Type-C Cable
MIC2_L
MIC2_R
OUT2_R
J_SENSE
OUT2_L
1
OUT_RET
MIC_RET
PRESENCE#
GN D
4
FAN_SPEED_CONTROL
3
CHA_FAN_SPEED
2
FAN_VOLTAGE
1
GND
There are two Front
Panel Type C USB 3.2
Gen2x2 Headers on this
motherboard. This header
is used for connecting a
USB 3.2 Gen2x2 module
for additional USB 3.2
Gen2x2 ports.
This header is for
connecting audio devices
to the front audio panel.
This motherboard
provides six 4-Pin water
cooling chassis fan
connectors. If you plan to
connect a 3-Pin chassis
water cooler fan, please
connect it to Pin 1-3.
Z690 AQUA OC
37