ENGLISH
Problem
Temperature setting LEDs
flash at the same time.
If the advice does not lead to the
desired result, call the nearest
Authorized Service Centre.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
Possible cause
An error has occurred in
measuring the temperature.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective door
Contact the nearest Author‐
ised Service Centre. The cool‐
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible.
installation instructions.
gaskets. Contact the Authorised Service
Centre.
23
Solution