Alarm Menu - Cold master MEDIKA 427 Installationsanleitung

NOTE:
A graph is erased when the controller is
switched off.

ALARM MENU:

If the alarm icon is flashing on the main display, an
alarm is occurring.
If the alarm icon is displayed but not flashing on the
main display, an alarm is occurred and recovered.
Once the alarm signal is detected the buzzer can be silenced by pressing any key.
Active alarms:
1. Push the ALARM key to enter the alarm menu.
2. The alarm menu displays the active alarm with the following layout:
a. First column = alarm code
b. Second column = alarm description
3. Push the LOG button to enter the ACTIVE
ALARM LOG.
This menu contains all the information concerning
the active alarms. In the first line, it is displayed how
many alarms are happening.
4. It's possible to move through the alarms by the
UP and DOWN keys.
5. Push the LOG button to enter the ALARM LOG.
This menu contains all the memorized alarms.
For each alarm the starting time and date and the
finish time and date are recorded.
Regulating probe tr3 failure
"P1"
"P2"
Logging probe Tl1 failure
"P3"
Logging probe Tl2 failure
"P4"
"Ha1"
EVP probe failure
TR3 High alarm
Alarm output ON; compressor output according
to parameters Con and CoF
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
20