Reversible Door - Cold master MEDIKA 427 Installationsanleitung

INSTALLATION OF VENTILATIONGUARD
Close the two ventilationguards placed on the rear of the
appliance, to ensure sufficient air circulation (See fig. 7)
Mounting of dividing system in the drawers
1. The Rail Holder with double adhesive tape is mounted
inside the rear and front of the drawer .
2. Put in the rails
3. Snap on the dividers and slide it
1
ADJUSTMENT OF DIVIDING PARTS
Integrated breakpoints allows storage of individual
products. Adjust the dividing part as follows.
(See fig 8) Cut into the appropriate seam
and break of the excess part.

REVERSIBLE DOOR

1. Open door. Locate and untighten screws.
Remove the foot panel as shown.(See 10.)
Fig. 5
2
15
Fig. 6
3
2. Remove the lock fin using a
flat-headed screwdriver. Then
remove the lock housing
Fig. 7
Fig. 8