Part7-In-Season Pool Maintenance And Water Care - AVENLI 12015 Bedienungsanleitung

RF3-21-GB
PART7-IN-SEASON POOL
MAINTENANCE AND WATER CARE
WARNING:
If applicable, the filter pump included with your pool is designed to remove dirt and
other small particles from your pool water. However, to maintain pool water that is perfectly clear, algae
free, and safe from harmful bacteria, it is VERY IMPORTANT TO ENGAGE IN A CONSISTENT REGIMEN
OF CHEMICAL TREATMENT. Contact your local pool supply retailer for guidance on the safe and effec-
tive use of chlorine, shock, algaecide and other such chemicals.
WARNING:
To avoid skin and eye irritation or even injury to bathers, never add chemicals to the
pool while it is occupied. Never add any chemicals or substances to your pool if you cannot verify the
exact quantity or type to add to the water. Consult a pool supply retailer for specific instructions and
guidelines concerning the use of chemicals in your pool.
WARNING:
It is highly recommended that pool owners frequently test their pool water to ensure
that the pH and chlorine concentration in the water is optimal for safe and enjoyable bathing throughout
the season. Please consult your pool supply retailer to find a suitable testing kit and instructions on its
use.
WARNING:
Non-respect of the maintenance rules may result in serious hazards for health and
especially for the children.
This product is designed to be storable, seasonal pools. If you live in a temperate area in which the pool will not be in use
year-round, it is STRONGLY RECOMMENDED that you drain your pool, clean and dry it thoroughly, and store it in a protected
area for the off-season. This will help extend the life of your pool and prevent a safety hazard from developing while the pool is
not in use. During the season of use of the pool kit, the filtration system (if applicable) must be put into service each day, long
enough to ensure at least a complete renewal of the volum of water.
In order to keep your pool water clean and hygienic all season long please closely adheres to the follow-
ing guidelines:
1. The proper and consistent use of basic pool chemicals are required to maintain the proper pH balance in your pool water.
Furthermore, the application of chemicals will help prevent the growth of harmful bacteria or algae in your pool, and assist your
filter-pump in keeping your water crystal clear. Chemicals that your pool may require include but are not limited to:
1) Tabular, Granular, or Liquid Chlorine: Disinfects pool water and inhibits algae growth.
2) PH Adjusting Chemicals: These are used to correct PH level and make water more or less acidic.
3) Algaecides: These chemicals are formulated to remove algae.
4) "Shock" (Super chlorinator): Eliminates certain organic and other combination compounds that can affect water clarity.
In order to obtain specific details on the use of chemicals, please consult a local pool supply retailer and provide them with
the volume of water in your specific pool, and if desired, a sample of your pool water. This will enable them to properly instruct
you on: 1) which chemicals to purchase, 2) what quantities of chemicals to purchase, and 3) how to use specific chemicals
safely and effectively.
2. Never let chlorine come into direct contact with the pool liner until it has completely dissolved. This means that granular or
tabulated chlorine is first dissolved in a bucket of water before applying to pool water, and likewise, liquid chlorine is slowly and
evenly poured into pool water from various locations around perimeter of pool.
DANGER: NEVER add water to chemicals. INSTEAD, always add chemicals to water. Also, never mix separate chemicals
together, rather, add chemicals to the pool separately and allow them to circulate throughout the pool before adding additional
types of chemicals.
3.We recommend that you purchase a test kit, and frequently test your pool water to make sure that your PH balance and
chlorine levels are optimal. Your local pool supply retailer can provide information on purchasing and using a test kit that is
most suitable for your needs. NOTE: Excessive chlorine levels or low (acidic) pH levels can damage your pool liner, so please
take corrective action as soon as possible if testing reveals either condition.
The tasks of removing larger debris from your pool and keeping the inside of the pool liner clean are simplified by using a
Prompt Set Pool Maintenance Kit, which includes a leaf skimmer and garden hose powered vacuum. Maintenance Kits are
included as a bonus feature in larger pool systems, and can also be purchased separately as an accessory.Please contact
14
PART7-IN-SEASON POOL
MAINTENANCE AND WATER CARE
your local after sale service center if you want to get advice on any repair during the life of the pool kit.
4. If applicable, check your filter-pump cartridge every two weeks (or more frequently during periods of heavy usage) to verify whether
it needs to be cleaned or replaced. If your cartridge is no longer white in color, attempt to spray it clean with a strong blast of water from
your garden hose. If your cartridge cannot be cleaned in this manner, the cartridge must be replaced. Failure to frequently clean and/
or replace your cartridges will affect the effectiveness of your filter pump and could shorten its useful life.
5. If your pool system included a cover, try to keep your pool covered at all times when not in use. This will help keep the wind and other
elements from depositing dirt and debris in your pool, and will also prevent excess rainwater from overfilling your pool.
6. Remind your family and friends to always hose or rinse off any dirt or tanning oil from their hands, feet, and body prior to entering
the pool.
7. It's necessary to monitor the bolts and hardware of the pool (eg. rust stain) when possible.
8. Once your pool has been filled with water for the season, take note if your pool becomes overfilled due to rainwater or accidental
overfill. If this should occur, it is important to drain or bale out the excess water as soon as possible. If it is an inflatable ring pool, the
water level should never be higher than the bottom edge of the inflatable ring.
9. Irrespective of materials used for swimming pool construction, accessible surfaces have to be checked regularly to avoid injuries.
PART8-TROUBLE SHOOTING
Repair Patch Instructions
(Small pinhole and small puncture leaks can be repaired with the included repair patch)
a) Locate the leak place.
b) Deflate the air.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it into required shape and size, which should be larger than the leaking area, put the patch on leaking
area and press tightly.
e) Wait 30 minutes for open-air drying of the repaired position.
If the damage is too big, we recommend using a Silicone or rubber based glue for repair.
Repair Glue Instructions
1 Locate the leak place.
2 Deflate（f necessary）,and drain thoroughly
3 Clean the area surrounding the leakage and wipe up all water from the surface.
4 Thoroughly clean the area surrounding the leak .Cut a piece of repair material in round shape, which should be larger than the
damaged area.
5 Gluing (need to purchase adhesive separately) one side of the material patch to the repair area. Please notice the material patch
need to be applied glue evenly.
6 Put the patch on the damaged area and press tightly. Wait 12 hours for drying. After patch has dried, apply glue around the edges
for a complete seal (dry 4 hours) swimming pool storage.
RF3-21-GB
15