Menu System; To Keep In Mind - FLIR T5 series Handbuch

3 EN-US English
5. Battery.
3.10 Screen elements
See Figure 2.4 Screen elements, page 4.
1. Result table.
2. Status icons.
3. Measurement tool (e.g., spotmeter).
4. Temperature scale.
5. Menu system button.

3.11 Menu system

See Figure 2.5 Menu system, page 4.
1. Recording mode button.
2. Measurement parameters button.
3. Image mode button.
4. Measurement button.
5. Color button.
6. Settings button.
7. Main menu.
8. Submenu.
3.12 Soft buttons
See Figure 2.6 Soft buttons, page 5.
1. Work folder button: Touch to open a menu where you can create new folders
and change the active folder.
2. Lamp button: Touch to turn on/off the camera lamp.
3. Continuous autofocus button: Touch to enable/disable continuous autofocus.
4. Overlay button: Touch to show/hide all overlay graphics and image overlay
information.
5. Temperature scale button: Touch to switch between the automatic and man-
ual image adjustment modes.

3.13 To keep in mind

• Adjust the focus first. When the camera is out of focus, the measurement will
be wrong.
• By default, most cameras adapt the scale automatically. Use this mode first,
but do not hesitate to set the scale manually.
#T810254; r. AC/43565/43565; mul 9