Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 EN-US English
Import, analyze, and fine-tune images easily. Then incorporate them into concise
documents to share findings and justify repairs.
Go to the following website to download FLIR Tools:
http://support.flir.com/tools
3.5 Check out our FLIR apps
Use our apps to analyze your IR images, create reports, and share your reports
using Dropbox, Box.net, FTP, e-mail, etc.
Use your mobile device to go to the following website and download the apps:
http://onelink.to/tools
3.6 Quick start guide
Follow this procedure:
1.
Before starting the camera for the first time, charge the battery for 3 hours
using the stand-alone battery charger.
2.
Put the battery into the camera battery compartment.
3.
Insert a memory card into the card slot.
Note Empty or use a memory card that has not previously been used in an-
other type of camera. The cameras may organize files differently on the
memory card. There is therefore a risk of losing data if the same memory
card is used in different types of cameras.
4.
Push the on/off button
5.
Aim the camera toward the object of interest.
6.
Adjust the infrared camera focus.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
7.
Push the Save button to save an image.
8.
Download and install FLIR Tools/Tools+ or FLIR Report Studio on your
computer.
2
9.
Start FLIR Tools/Tools+ or FLIR Report Studio.
2. FLIR Tools+ and FLIR Report studio are licensed software.
#T810254; r. AC/43565/43565; mul
to turn on the camera.
7
Werbung
Inhaltsverzeichnis
