Basic Operations; Cd Functions - oneConcept 10026861 Handbuch

Remote Control
• Remove the battery compartment cover located at the front of the remote control.
• Indert 2 AA batteries, making sure to match their polarities to the markings on the side of the
compartment.
• To use the remote point at the sensor of the player. Operate the remote within 15 feet of the sensor
and at the angle of +/- 60 degrees.
• Batteries in the remote will last for approximately 6 months under normal use. Replace the batte-
ries if the remote control doesn't work.
• Do not mix old with new batteries or different types of batteries.
• Remove the batteries from the remote if it will not be used for a long period of time.
WARNING
The battery used in this device may present a fi re or chemical burn if mistreated. Do not
recharge dissamble, incinerate oder heat the battery and keep ir away from children.
• Press the STANDBY button to turn the player on.
• To open the CD Door press
click into place).
• Press the FUNCTION button on the unit or remote to the „ CD" mode.
• Press PLAY/PAUSE/FM.ST to start CD playback.
Play/Pause/Stop CD
• Press PLAY/PAUSE/FM.ST to start playback.
• Press PLAY/PAUSE/FM.ST during playback to pause.
• Press STOP during playbeack to stop the disc.
Previous/Next (Skip)
• Press to skip to the previous track.
• Press to skip to the next track.
Reverse/Forward (Scan)
• Press and hold
• Press and hold
Equalizer Presets
• Press EQ button to cycle through the equalizer preset options: Flat, Rock, Classic, Pop, Jazz.
Repeat/Random Operation in CD DISC Mode
During CD playing, press the PROGRAM/PLAY-MODE button on unit or remote repeatedly to select
the following repeat options:
• Repeat: Repeat the current track.
• Repeat All: Repeat all tracks.
• Intro: When the intro play mode is selected , the unit will play 10 seconds of every tracks in the CD.
• Random: The unit will shuffl e all the tracks in the CD and will play in random order.

Basic Operations

. Insert a CD with its label facing up. Close the CD Door (it will

CD Functions

to can through the current track in a reverse direction.
to scan through the current track in a forward direction..
16