Wall Mounting; Basic Functions - Oneconcept 10029362 Bedienungsanleitung

EN
24

Wall mounting

• You can remove the stand of the stereo system and mount the unit directly
on a load-bearing wall. Ask a skilled / trained person for help if you are
unsure.
• Use screws (2 screws are required) that match the wall material and use
wall plugs.
• Make a drilling template or draw directly on the wall: The holes must be
drilled on a horizontal line at a distance of 160 mm from each other. Make
sure that you choose the appropriate tools, suitable/suitable dowels etc.
• Remove the stand and hang the stereo system with the eyelets on the rear
side of the stand on the heads of the screws that are not fully inserted in
the plugs.

BASIC FUNCTIONS

MODE
Press MODE repeatedly for mode selection (Radio / CD / USB / AUX / BT).
VOL+/-
Press VOL+/- to adjust the output level.
MUTE
Press MUTE to mute the sound output. Press again to un-mute.
X-BASS
Press to toggle X-BASS on/off.
B