Using The Product; Declaration Of Conformity - nedis WIFILRC10GU10 Kurzanleitung

5. Check if the lamp is blinking. If so, tap to confirm.
If the lamp does not blink, turn the lamp off and
4
on 3 times and check again.
6. Enter the password of the 2,4 GHz Wi-Fi network to
which your phone is connected and tap Confirm.
The Nedis SmartLife app will now search for the
lamp.
7. Rename the lamp after it has been found and
added.
If the regular connection method fails, the lamp
4
can be connected using AP mode:
a. Tap + B
b. Select the lamp from the list of available devices.
c. Select AP Mode in the top right corner.
d. Turn the lamp off and on 3 times and check that
the light starts blinking slowly.
e. Follow the steps in the application.
See our support webpage to discover all
4
possibilities of this Nedis® product.

Using the product

The product can be controlled from any distance using
the Nedis SmartLife app.
The home menu of the Nedis SmartLife app shows a
control tile for each connected lamp and/or group.
The product can be connected to Google Home
4
or Amazon Alexa to enable speech control.
The product can be connected to IFTTT to enable
4
external conditions to trigger the lamp.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the
product WIFILRC10GU10 | WIFILRW10GU10 from our
brand Nedis
according to all relevant CE standards and regulations
and that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU
regulation.
3 .
, produced in China, has been tested
®
6