Installing The App; Connecting The Product; Setting Up The Product - nedis BTLS20RGBW Kurzanleitung

• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
• Only use the provided power cable.
• Do not expose the product to water or moisture.

Installing the app

1. Download the Nedis Smartlife app for Android or iOS on
your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your
e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect
with and tap Done.

Connecting the product

1. Align the arrow on the LED strip connector A
sign on the LED strip A
2. Plug A into A
3
3. Plug the USB cable A
A
blinks.
2
If A does not blink, disconnect and reconnect A
2
4
the power source three times until A
4. Enable Bluetooth on the device you want to pair.
5. Tap + in the top right corner.
6. Under Search Device, select the product from the list of
available devices.
7. Rename the product after it has been found and added.

Setting up the product

1. Unplug A
1
2. Clean the surface from dust and grease.
The surface must be smooth. Do not place the product
4
on knitted/wool fabrics, dust wall, rough plastic surface or
frosted glass.
3. Remove part of the 3M tape from the back of A
4. Place the start of A
Make sure the power source is within reach.
4
5. Unroll A
2 .
6. Remove the 3M tape and press A
position.
7. Firmly press A
-
Do not use hard objects to press A
.
2
2 .
1 into a power source.
from the power source.
in the desired position.
2
down with your hand.
2
2 starts to blink.
2 into the desired
2 down to prevent
5
to the +5V
3
from
1
2 .