Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
It is to be ensured that all connecting cables are not to be bent or squashed. The
consequence of this could be malfunctions, short circuiting or a device defect.
Make sure that the power strip is de-energised before you connect any
devices.
The power strip is not designed to be mounted or hung for example using screw
connections. It can only be placed on an even and horizontal surface.
• Make sure that the ON/OFF main switch and the separate ON/OFF switches are turned off
(set to the 0 position (off)).
• Connect the plug of the power strip to your mains outlet.
• Connect up to six devices to the safety sockets of the power strip.
• Now switch on the power strip by pressing the ON/OFF main switch. The ON/OFF main
switch turns red.
• The surge protection indicator lamp turns blue and indicates that the surge protection is
active. If the surge protection indicator lamp no longer comes on, the surge protection is no
longer available.
• Switch on the power points individually using the separate ON/OFF switches. The ON/OFF
switches turn red.
Maintenance and cleaning
• The product is maintenance-free for you. There are no components which have to be main-
tained by you inside the product. As a result you should never open/dismantle it. Mainte-
nance and repairs can only be carried out by a specialist or a specialist workshop.
• Before cleaning always remove the plug of the power strip from the mains socket. Then
disconnect all connected devices from the power strip.
• For cleaning all you require is a dry, soft and clean cloth. Dust can be easily remove with the
aid of a longhaired, soft and clean brush and a vacuum cleaner.
• Never use aggressive cleansers or chemical solvents. They might damage the housing and
impair the functioning of the unit.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the
environment.
Technical data
Connection data ...................................230 V/AC (max. 250 V/AC), 50 Hz, 16 A, max. 3680 W
Grounded mains sockets ......................6 (enhanced protection against accidental contact)
Leakage current ....................................max. 12000 A (2 x 6000 A)
Cable length .........................................1.5 m
Measurements (L x H x W) ...................324 x 39 x 70 mm
Weight ..................................................approx. 490 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing
in electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical state at the time of printing.
Copyright 2021 by Conrad Electronic SE.
*1296314_V4_0521_02_dm_mh_3L
Werbung
