BORETTI ROBUSTO Benutzerhandbuch Seite 35

Step 8
The warming rack [nr.10] is made to slot into the two holes in the back of the BBQ.
Warming rack
Step 9
Fix the gas hose [nr.11] to the connection on the BBQ and on the other end to the
side burner as shown in image 12. Tighten the hose with a wrench and then perform
a leak test, as described in the following section. This is necessary before you can
start using the Robusto.
Img. 12
Hose gas regulator
Side burner
gas hose
34