Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

placing the charger or battery pack in a warm environ-
ment such as a metal shed or an uninsulated trailer.
To reduce the risk of electric shock, unplug the charger
from the outlet before attempting any cleaning. Remov-
ing the battery pack will not reduce this risk.
In the event of a cell leaking, do not allow the liquid
to come into contact with the skin or eyes. If contact
has been made, wash the affected area with copious
amounts of water and seek medical advice.
Seek medical advice immediately if a cell or battery has
been swallowed.
Always observe the polarity marks (+) and (-) on the cell,
battery and equipment and ensure correct use.
Retain the original cell and battery literature for future
reference
When disposing of secondary cells or batteries, keep
cells or batteries of different electrochemical systems
separate from each other.
Do not use any cell or battery which is not designed for
use with the equipment.
Do not mix any cells of different manufacturers, capacity,
size or type within a device.
Always purchase the battery recommended by the de-
vice manufacturer for the equipment.
ADDITIONAL SAFETY INFORMATION FOR BATTERY
CHARGERS.
This appliance should not be used by children and/or
persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge. Children
shall not play with the appliance.
Do not place any object on top of the charger or place
the charger on a soft surface that may result in excessive
internal heat.
Do not attempt to disassemble the charger. Take it to
an electrician or tool repairer when service or repair is
required.
Appliances/power tools/machines with Lithium-ion bat-
teries shall only be charged with the specifically designed
Lithium-ion battery charger purchased with this tool. Do
not attempt to charge the battery with any charger other
than the one supplied as this is potentially dangerous.
Before using the charger, read all instructions, labels and
cautionary markings on the charger.
The charger is not intended to be used for any purpose
other than charging the battery pack for this tool. Any
other use may result in risk of fire or electric shock. Do
not attempt to use the charger on any other voltage or
rating than those stated on the rating plate.
Do not use the charger for any purpose other than that for
which it is intended.
Do not use the charger to charge any device other than
the appliance/power tool/machine it was sold with.
Do not use an extension cord unless absolutely neces-
sary. The use of an improper extension cord could result
in fire or electric shock.
Never attempt to connect two chargers together.
Use the battery charger indoors only.
Make sure that the charger cable is positioned where it
will not be stepped on, tripped over or otherwise subject-
ed to damage or stress. Keep the cord away from oper-
ating appliance/power tool/machine.
Do not operate the charger in a cabinet or other enclo-
sure unless ventilation is adequate.
Do not place any object onto the charger or allow any
object to rest on the charger.
Never place the appliance/power tool/machine or charg-
er near or over a heat source such as radiator or heater.
WARNING Never charge your Lithium-ion battery below
or above temperatures recommended as this may result
in fire or permanent damage to the battery.
The most suitable temperatures to charge the battery are
between 20°C/68°F and 25°C/77°F.
WARNING Do not allow water or any other liquid to come
into contact with the charger as this may result in electric
shock. Do not position the tool or battery charger near
water. Take care not to spill liquid of any kind on the tool
A5P | 01
or charger.
DANGER Do not use the charger if it has been subjected
to a heavy knock, dropped, or otherwise damaged in any
way. Take the charger to an authorised service centre for
it to be checked and repaired.
Do not attempt to disassemble the charger by opening
or removing covers.
To reduce risk of damage to the electric plug and cord,
pull by the plug rather than the cord when disconnecting
the charger.

TECHNICAL SPECIFICATION

Tool Rating: 12V MAX
Battery Rating: 12V MAX
Charger Input: 100V - 240V ~ 50/60Hz 0.8A
Charger Output: 13.5V
FR
Veuillez lire attentivement ces instructions avant utilisa-
tion et conservez-les pour pouvoir les consulter à l'avenir.
UTILISATION PRÉVUE Utilisez uniquement l'outil élec-
trique/la machine pour son usage prévu et conformé-
ment aux paramètres précisés dans ce manuel.
Cet outil / machine est à usage domestique uniquement.
Cet/Cette outil électrique/machine n'a pas été conçue
pour être utilisée par des personnes souffrant de capac-
ités physiques, sensorielles ou mentales réduites, non
plus que par celles qui manquent de connaissances et
d'expérience, à moins qu'une personne responsable de
leur sécurité ne les supervise ou ne leur ait donné les
instructions appropriées à propos de l'utilisation du pro-
duit.
PRÉCAUTION D'ORDRE GÉNÉRAL
Ne restez pas sous la branche que vous coupez.
N'autorisez jamais qu'il soit utilisé comme un jouet. Les
enfants devraient toujours être supervisés pour s'assurer
qu'ils ne jouent pas avec l'outil électrique/la machine.
Si l'outil électrique/la machine ne fonctionnait pas cor-
rectement, qu'il est tombé, qu'il a été endommagé, laissé
en extérieur ou immergé dans du liquide, ne l'utilisez pas
et contactez les Services à la clientèle de DOMU Brands.
N'utilisez pas l'outil électrique/la machine si des pièces
ont l'air défectueuses, manquantes ou endommagées.
Avant utilisation, assurez-vous que toutes les pièces sont
bien attachées.
RISQUES DE BLESSURE Évitez tous contacts phy-
siques avec les surfaces reliées à la terre ou mises à la
masse, par exemple les tuyaux, les radiateurs, les cui-
sinières et les réfrigérateurs. Si votre corps est relié à la
terre ou mis à la masse, les risques de chocs électriques
sont plus grands.
Prévenez tout démarrage involontaire. Assurez-vous que
l'interrupteur se trouve sur la position arrêt avant de con-
necter à l'alimentation et/ou à la batterie, de ramasser
ou de transporter l'outil. Transporter les outils électriques
avec le doigt sur l'interrupteur ou mettre sous tension des
outils électriques en marche est une invite aux accidents.
Ne faites jamais fonctionner d'outils électriques dans
des atmosphères explosives, par exemple en présence
de liquides, de gaz ou de poussières inflammables, Les
outils électriques créent des étincelles qui pourraient en-
flammer les poussières ou les émanations.
Protégez toujours vos yeux. Tout outil électrique peut
envoyer des corps étrangers dans vos yeux et entraîner
des dégâts oculaires permanents. Portez toujours des
lunettes de sécurité (pas en verre) conformes à la norme
de sécurité Z87.1 de l'ANSI. Des lunettes traditionnelles
possèdent uniquement des verres résistants à l'impact.
N'exposez pas les outils électriques à la pluie ou à des
conditions humides. De l'eau pénétrant dans l'outil élec-
trique augmentera le risque de choc électrique.
Lorsque vous utilisez un outil électrique/une machine,
restez vigilant, regardez ce que vous faites et utilisez vo-
2000mAh
1.5A

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

3500192

Inhaltsverzeichnis