Inhaltsverzeichnis
Werbung
If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure these are connected
and properly used. Use of dust collection can reduce
dust-related hazards.
WORK AREA SAFETY Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tool/machine in explosive atmos-
pheres, such as in the presence of flammable liquids,
gases or dust.
Power tool/machine create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool/machine. Distractions can cause you to lose
control.
GENERAL POWER TOOL USE AND CARE Do not force
the power tool/machine. Use the correct power tool/ma-
chine for your application. The correct power tool/ma-
chine will do the job better and safer at the rate for which
it was designed.
Do not use the power tool/machine if the switch does not
turn it on and off. Any power tool/machine that cannot
be controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool/machine before making
any adjustments, changing accessories, or storing pow-
er tool/machine tools. Such preventive safety measures
reduce the risk of starting the power tool/machine ac-
cidentally.
Store idle power tool/machine out of the reach of children
and do not allow persons unfamiliar with the power tool/
machine or these instructions to operate the power tool/
machine.
Power tool/machines are dangerous in the hands of un-
trained users.
Maintain power tool/machines. Check for misalignment
or binding of moving parts, breakage of parts and any
other condition that may affect the power tool/machines
operation. If damaged, have the power tool/machines re-
paired before use. Many accidents are caused by poorly
maintained power tool/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edg-
es are less likely to bind and are easier to control.
Use the power tool/machine accessories and tool bits in
accordance with these instructions, take into account the
working conditions and the work to be performed.
Use of the power tool/machine for operations different
from those intended could result in a hazardous situation.
CLEANING & MAINTENANCE Never soak or immerse
electrical components and or a component that has a
plug attached.
Disconnect the plug from the power source before mak-
ing any adjustments, changing accessories, or storing.
Such preventive safety measures reduce the risk of start-
ing the power tool accidentally.
Ensure the motor has fully stopped before cleaning,
clearing a blockage, checking, or carrying out any main-
tenance on the tool.
Maintain your power tool. Check for misalignment or
binding of moving parts, breakage of parts and any oth-
er condition that may affect the power tool's operation.
If damaged, have the power tool repaired by a qualified
repair person before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Regularly check external nuts and fixings to ensure vibra-
tion caused by normal use has not begun to loosen them.
Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the Breaker.
Locate the power tool out of reach of children, in a dry,
A5P | 01
locked unit.
Make sure that the cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to dam-
age or stress.
Remove the plug from the mains socket / battery (where
applicable) before carrying out any adjustment or main-
tenance.
Always store the power tool/machine in a dry place.
If the power cord is damaged, it must be replaced by a
qualified service technician.
Keep the ventilation slots and motor housing as free of
dirt and dust as possible (where applicable).
Clean the power tool/machine by rubbing it with a clean
cloth and blow it clean using low-pressure compressed
air is recommended.
Ensure you have all the pieces listed. If you are missing
any components, contact our customer services depart-
ment at hello@domu.co.uk (UK/EU)
usasuport@domubrands.com (US).
DO NOT proceed with assembly if any components are
missing.
BATTERY WARNINGS (INCLUDING BUTTON CELLS,
AA BATTERY S, LITHIUM PACKS)
WARNING The use, and particularly abuse of portable
sealed secondary lithium cells and batteries may result in
the creation of hazards and may cause harm.
Do not dismantle, open or shred secondary cells or bat-
teries.
Keep batteries out of the reach of children.
NOTE the battery pack is not fully charged out of the box.
Secondary cells and batteries need to be charged before
use, always refer to the cell or battery manufacturer's in-
structions and use the correct charging procedure.
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another
battery pack.
Use the appliance/power tool/machines only with specif-
ically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
First read the safety instructions and then follow the
charging notes and procedures.
Incorrect reassembly may result in a risk of electric shock
or fire.
Protect the battery and charger against water and mois-
ture. Always keep cells and batteries clean and dry.
Wipe the cell or battery terminals with a clean dry cloth if
they become dirty.
Protect the battery from heat and fire. Place the charger
in a position away from any heat source and avoid stor-
age in direct sunlight.
Do not maintain secondary cells and batteries on charge
when not in use.
After extended periods of storage, it may be necessary to
charge and discharge the cells or batteries several times
to obtain maximum performance.
Do not short-circuit a cell or battery.
Do not store cells or batteries haphazardly in a box or
drawer where they may short-circuit each other or be
short-circuited by conductive materials. When the bat-
tery pack is not in use, keep it away from other metal
objects such as paper clips, coins, keys, nails, screws
or other small metal objects that can make a connection
from one terminal to another. Short-circuiting the battery
terminals together may result in burns or a fire.
Do not expose cells or batteries to mechanical shock.
Never attempt to open the battery pack for any reason or
if the plastic housing of the battery pack breaks or cracks,
immediately discontinue use and do not recharge.
When possible, remove the battery from the appliance/
power tool/machine when not in use.
Do not leave a battery on prolonged charge when not in
use or stored for extended periods of time as this may
cause damage to the battery.
To facilitate cooling of the battery pack after use, avoid
Werbung
Inhaltsverzeichnis
