Herunterladen Diese Seite drucken

hepco & becker 6539521 00 01 Montageanleitung

Werbung

Kofferträger / Side carrier,
festverschraubt /firmly bolted
Honda CRF 1100 L Africa Twin
ab Baujahr 2019 / from date of manufacture 2019
Artikel Nr.: / Item-no.:
9521
653
00 01
schwarz/black
Baubreite des Kofferträgers 53 cm
Width of the side carrier 53 cm
WICHTIG
IMPORTANT
Die Voraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung. Wenn Sie sich nicht sicher sind,wie
man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen.
Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf
das entsprechende Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei angebaut ist.
Anzugsmomente beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
Of course, the assembly requires a certain technical experience. If you are not sure how to execute a determined action,
you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws
should be tightened to the torque specified. This guarantees, that the product is mounted without tension. Observe
the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!
1

Werbung

loading

Inhaltszusammenfassung für hepco & becker 6539521 00 01

  • Seite 1 Kofferträger / Side carrier, festverschraubt /firmly bolted Honda CRF 1100 L Africa Twin ab Baujahr 2019 / from date of manufacture 2019 Artikel Nr.: / Item-no.: 9521 00 01 schwarz/black Baubreite des Kofferträgers 53 cm Width of the side carrier 53 cm WICHTIG IMPORTANT Die Voraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung.
  • Seite 2 Schrauben und Schutzblech entfallen. On the right and left, remove the screw under the pillion seat, the screws of the left pillion footrest bracket, the screw of the rear muffler bracket and the protection plate on the right footrest bracket. 6539521 00 01...
  • Seite 3 Endtopf. Hierfür die Zylinderschraube M8x50 sowie die origi- nale Lochscheibe verwenden. Fastening of the carrier right middle: At the now free thread together with the exhaust muffler with the allen screw M8x50 and the original perforated disc. 6539521 00 01...
  • Seite 4 Montage Verbindungsbügel rechts/links: Die Montage erfolgt zwischen den Trägern mit den Sechskantschrauben M6x16 sowie U-Scheiben Ø6,4. Fastening of the bracing bow right/left: Between the carriers with hexagon screws M6x16 and washers Ø6,4. 6539521 00 01...
  • Seite 5 Weiteres Zubehör auf unsere Homepage. More accessories: see our homepage. Hepco & Becker GmbH Tel.: +49 (0)6331 - 1453 - 100 An der Steinmauer 6 Fax: +49 (0)6331 - 1453 - 120 D-66955 Pirmasens eMail: vertrieb@hepco-becker.de Germany www.hepco-becker.de 6539521 00 01...