Makita 9566C Betriebsanleitung Seite 9

• Lock nut for abrasive disc
• Lock nut wrench
• Side grip
• Rubber pad
NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
h, AG
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h
,
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration emis-
sion value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
All manuals and user guides at all-guides.com
ENG905-1
): 86 dB (A)
pA
): 97 dB (A)
WA
ENG900-1
2
): 7.0 m/s
2
2
): 6.5 m/s
2
2
): 2.5 m/s
DS
2
ENG902-1
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: 9566C, 9566CV
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is avail-
able from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
28.2.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENH101-18
9