Select Option; Starting The Dishwasher; Remaining Time - Atag VA8113QT Gebrauchsanweisung

Select option

To select an option, press the option button until the desired option is shown on the display. The
available options vary between programs.
1)
Auto Open
The dishwasher door opens automatically, which shortens the program time and improves the drying
results. Wait until the dishwasher indicates that the program has ended and the dishes have cooled
before unloading the dishwasher.
The drying time for the Auto Open option varies between programs.
NOTE!
For the best drying results, do not close the door before the drying phase has finished and the
machine has automatically switched off.
WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may
damage the door lock mechanism. Wait at least 5 minutes before closing the door.
Delayed Start
When you select Delayed Start, the dishwasher will start 1-24 hours after you have pressed the button
Start/Stop and closed the door.
1. Press the button once to activate Delayed Start. Press the button several times – or hold it in –
to set the desired number of hours.
2. Press Start/Stop and close the door. The timer counts down and the dishwasher starts after the
selected delay.
If you want to cancel the Delayed Start option, open the door then press and hold Start/Stop for three
seconds.

Starting the dishwasher

Press Start/Stop until the display shows "Program started, close door". This indicates that the
dishwasher is ready to start. Close the door properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes of the last button press,
the machine switches off.

Remaining time

Once you have selected a program, program mode and options, the time the program took when
last used is displayed.
1)
The Auto Open option is pre-selected for some programs.
Using the dishwasher
17