Daily Use - Zanussi ZEI6840FBA Benutzerinformation

RESIDUAL HEAT INDICATOR
WARNING!
burns from residual heat. The
indicators show the level of the
residual heat for the cooking zones
you are currently using. The indicators
may also come on for the neighbouring
cooking zones even if you are not
using them.

DAILY USE

WARNING! Refer to Safety chapters.
ACTIVATING AND DEACTIVATING
Touch for 1 second to activate or deactivate the
hob.
AUTOMATIC SWITCH OFF
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate
the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean the
control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change
the heat setting. After some time
and the hob deactivates.
The relation between the heat setting and the
time after which the hob deactivates:
Heat setting
1 - 2
3 - 4
5
There is a risk of
comes on
The hob deactivates
after
6 hours
5 hours
4 hours
The induction cooking zones produce the heat
necessary for the cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
Heat setting
6 - 9
SELECTING THE COOKING ZONE
To set the cooking zone touch the sensor field
related to this zone. The display highlights the heat
setting indication ( ).
THE HEAT SETTING
Set the cooking zone.
Touch to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
Refer to "Technical data" chapter.
To activate the function for a cooking zone:
first set the cooking zone and than set the maximum
heat setting. Touch
To deactivate the function: touch
LOCK
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the
heat setting.
The hob deactivates
after
1.5 hour
and
until comes on.
.
to
at the
23