urmet FISHEYE Serie Schnellanleitung Seite 18

EN
Do not use this device on any unstable support such as lurching or sloping table to
prevent the device from falling and be damaged.
If water or any other material should penetrate the camera, stop using it as it might cause
fire or electrical shock and contact the authorized retailer or installer.
Do not cover the device with any cloth while using to prevent deformation of the
external part and inner components heating which might provoke fire, electrical shock
or mechanical damages.
Do not put magnets or magnetized objects close to the device to prevent functional
anomalies.
Do not use this device in presence of smoke, steam, humidity, dust or intense vibrations.
Do not use the device shortly after moving it from warm to cold environment and vice
versa. After moving the device wait three hours before using it: this time is necessary for
the device to adapt to the new environment (temperature, humidity, etc.).
Usage precautions
Check the device is not damaged after removing the packaging.
Check the working environment is not too humid and the temperature is within the
indicated range.
Do not point the camera against sunlight to prevent sensor damages.
Device cleaning
Use a dry cloth to remove dust and dirt from the device.
If dirt cannot be removed with a dry cloth, use a humid cloth and a neutral cleanser.
Do not use spray cleanser for device cleaning. Do not use volatile liquids such as
gasoline, alcohol, solvents etc. or chemical treated cloth to clean the device to prevent
deformations, damages or scars on the finishing paint.
Disconnect the device from the electrical outlet before cleaning.
Video recording
This device is not designed as a burglar system but mainly to transmit and record video
images. URMET S.p.A. is not in any way responsible for loss or damages of the user
consequent to theft.
Before using the device, record a demo video to verify the correct functionality of this
feature. URMET S.p.A. is not in any way responsible for loss of recorded data consequent
to wrong setting or usage, device malfunctioning or failure.
This device is composed by electronic precision components. Do not hit the device while
recording as it might affect the video.
Privacy and Copyright
The IP camera is designed for surveillance systems. Video recording is subject to the laws
applicable to the Country where used. It is forbidden to record images with Copyright.
The User is responsible to check and respect all local laws and norms for video signal
recording. The manufacturer is NOT in any way liable for any usage of the product which
might result not compliant to the relevant norms.
DS1093-575 18