How To Install; Wireless Monitor - Wisenet BabyView eco flex SEW-3048W Bedienungsanleitung

How to install

CAUTION: If you are using this system to watch a young child, please do
not place the camera within the child's reach.

Wireless Monitor

1. Place the monitor in an area that provides clear reception to your
camera(s).
2. Pull out the stand.
Do not pull out the monitor stand with excessive
n
`
force.
Wireless Camera
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adapter.
Before starting permanent installation, verify its performance by
observing the image on the monitor when camera is positioned in the
same location/position where it will be permanently installed and the
monitor is placed in the location where it will be used most of the time.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location
for the camera that provides a clear view of the area you want to
monitor, which is free from dust, and is not in line-of-sight to a strong
light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions
between the camera and the monitor.
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER
place camera or cords within 3 feet of crib or playpen. Never use
extension cords with AC Adapters. Only use the AC Adapters
provided.
English · 8
On the bottom part of the camera there is a dot marked that shows the
n
`
detachable part.