Important Safety Instructions - Wisenet BabyView eco flex SEW-3048W Bedienungsanleitung

CAUTION
• Risk of explosion if battery is replaced by an incorrect type.
• Immediately discontinue use of the product if the battery or battery door is swollen or bulging
which may be a precursor to overheating batteries.
• It is good practice to periodically remove the battery door at the back of the monitor to check
if the battery has any signs of deformations.
• Do not let a loose battery come in contact with metal objects such as coins, keys or
jewellery.
• Dispose of used batteries according to the instructions.
• If the battery is not fully charged after 7 hours, stop charging immediately. Overcharging may
cause fire, burns or injuries.
• Please use the product in a room-temperature environment. The usage of the monitor in
extremely high temperature or low temperature will shorten the lifespan of the battery. (ex.
Leaving the product in a closed automobile during summer will affect the battery lifespan).
• This battery is expendable. If you noticed the battery has stopped charging or that the
battery's usage time has shortened drastically, stop using the product immediately.
BabyView eco FLEX
User Manual
Copyright
©2017 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in
this manual are the registered trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced,
distributed or changed, partially or wholly, without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this
document, but no formal guarantee shall be provided. Use of this document and the subsequent
results shall be entirely on the user's own responsibility. Hanwha Techwin reserves the right to
change the contents of this document without prior notice.
English · 2

IMPORTANT SAFETY INSTRUCTIONS

1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings, install in accordance with the manufacturer's
instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.
Only use attachments/ accessories specified by the manufacturer.
12.
Unplug this apparatus during lighting storms or when unused for long periods of
time.
13.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.