How To Install - Wisenet BabyView eco PT SEW-3049W Benutzerhandbuch

How to install

CAUTION: If you are using this system to watch a young child, please do
not place the camera within the child's reach.
Wireless Monitor
1. Place the monitor in an area that provides clear reception to your
camera(s).
2. Pull out the stand.
Do not pull out the monitor stand with excessive
n
`
force.
Wireless Camera
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adapter.
Before permanently installing the camera, verify the camera's
performance. Check the monitor's image quality when positioning the
camera in the same location/position of where it will be installed, and
where the monitor will be placed when being used.
Installation Warnings
Aim the camera(s) for optimal viewing: Select a camera location that
provides a clear view of the area you want to monitor, which is free
from dust and is not in direct line-of-sight to a strong light source or
direct sunlight.
Avoid installing the camera where there are thick walls or obstructions
between the camera and the monitor.
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER
place camera or cords within 3 feet of crib or playpen. Never use
extension cords with AC Adapters. Only use the AC Adapters
provided.
English · 8
1. Carefully unpack the camera.
If you are installing cameras that did not come with the system, please
see the camera pairing section in this manual for details on installation.
2. Mount the camera to the wall.
Mark the position of the screw hole on the
wall, then drill a hole and insert a screw.
Then firmly attach the camera to the wall
by placing the stand over the installed
screw and pushing the base downwards.
To install on a concrete wall, drill a hole and use the plastic anchor to so the
n
`
camera is in a fixed position.
The camera can also be placed on a flat surface, such as a table or shelf.
`
Mounting hardware is not required.
3. Adjust the viewing angle of the camera.
Pan/tilt using the keypad on the monitor to
adjust the viewing angle of the camera.
Adjusting the camera with excessive force may damage the unit.
n
`