MSI MS-7097 Bedienungsanleitung Seite 12

Fan Power Connectors: CPUFAN1/PWRFAN1/SYSFAN1
The 4-pin CPUFAN1 (processor fan) and 3-pin PWRFAN1
(power supply fan) / SYSFAN1 (system fan) support
system cooling fan with +12V. CPUFAN1 can support
three- or four-pin head connector.
When connecting the wire to the connectors, always take note that the red wire is the positive
and should be connected to the +12V, the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for the proper CPU cooling fan.
Front Panel Connectors: JFP1/JFP2
The mainboard provides two front panel connectors for
electrical connection to the front panel switches and
LEDs. JFP1 is compliant with Intel
Connectivity Design Guide.
Front Panel Audio Connector: JAUD1
The front panel audio connector allows you to connect to
the front panel audio and is compliant with Intel
Panel I/O Connectivity Design Guide.
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have
to be jumpered in order to have signal output directed to the rear audio ports.
Otherwise, the Line-Out connector on the back panel will not function.
Front USB Connector: JUSB1/JUSB2
The mainboard provides two standard USB 2.0 pin headers
JUSB1&JUSB2. USB2.0 technology increases data transfer rate
up to a maximum throughput of 480Mbps, which is 40 times fa
than USB 1.1, and is ideal for connecting high-speed USB
interface peripherals such as USB HDD, digital cameras, MP3
players, printers, modems and the like.
MSI Reminds You...
Please note that the pins of VCC & GND must be connected correctly or it may cause some
damage
Downloaded from www.Manualslib.com
®
Front Panel I/O
manuals search engine
Power Power
LED Switch
2 10
1 9
Reset
HDD
Switch
LED
JFP1
®
Front
ster
8
Speaker
8
2
7
1
Power
LED
JFP2