Safety Information - Axis Q8752-E Installationsanleitung

Safety information

Hazard levels
DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in death or serious
injury.
CAUTION
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate
injury.
NO NO NO TICE TICE TICE
Indicates a situation which, if not avoided,
could result in damage to property.
Other message levels
Important
Indicates significant information which is
essential for the product to function correctly.
Note
Indicates useful information which helps in
getting the most out of the product.
Safety instructions
DANGER
Risk of electric shock. All cables shall be
de-energized before installing or performing
maintenance on the product.
WARNING
The Axis product shall be installed by a
trained professional, and in compliance with
local laws and regulations.
CAUTION
Risk of injury. Moving parts. Keep your
body parts away from the product when in
operation. Disconnect from power supply
before installing or performing maintenance
on the product.
CAUTION
Risk of injury. Hot surface. Do not touch
the product when in operation. Disconnect
from power supply and allow the surfaces to
cool before performing maintenance on the
product.
NO TICE TICE
NO NO TICE
•
The Axis product shall be used in compliance
with local laws and regulations.
•
Store the Axis product in a dry and
ventilated environment.
•
Avoid exposing the Axis product to shocks
or heavy pressure.
•
Do not install the product on unstable poles,
brackets, surfaces or walls.
•
Use only applicable tools when installing
the Axis product. Using excessive force with
power tools could cause damage to the
product.
•
Do not use chemicals, caustic agents, or
aerosol cleaners.
•
Use a clean cloth dampened with pure water
for cleaning.
•
Use only accessories that comply with the
technical specification of your product.
These can be provided by Axis or a third
party. Axis recommends using Axis power
source equipment compatible with your
product.
•
Use only spare parts provided by or
recommended by Axis.
•
Do not attempt to repair the product
yourself. Contact Axis support or your Axis
reseller for service matters.
•
Do not point the camera lens toward the sun
or other high-intensity radiation sources
because this could cause damage to the
camera.
Transportation
NO TICE TICE
NO NO TICE
•
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Battery
The Axis product uses a 3.0 V BR2032 lithium battery
as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last
for a minimum of five years.
Low battery power affects the operation of the RTC,
causing it to reset at every power-up. When the
battery voltage is low, a log message will appear in
the product's server report.
CAUTION
Do not replace the battery yourself. Contact
Axis support if the log message requests a
battery change.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.