Herunterladen Inhalt Inhalt Diese Seite drucken

Unpacking And Operation - Christopeit Sport CS 2000 Montage- Und Bedienungsanleitung

Walking laufband zum geh- und lauftraining
Vorschau ausblenden Andere Handbücher für CS 2000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

UNPACKING AND OPERATION

Before usage, observe our recommendations and safety instructions.
STEP 1:
Remove the treadmill
1. Remove small parts, loose packing material out of the box and
then take out with help of a second person the preassembled frame
of packaging. Put your hands below the main frame (51) and take care
of no squeezing.
STEP 2:
Unfold the handgrips
1. Lift the handgrips (43) from the lying position in upright position.
Hold the handgrips (43) firmly during the entire folding process, as the
dampers (21) exert corresponding force on the handgrips (43).
STEP 3:
Fold up the handgrips
1. To fold the handgrips (43) back move them into lying end positi-
on. Caution hold the handgrips (43) as the dampers exert force on the
handgrips. Attention: We always recommend training with handgrips
(43) in upright position and with safety clip so it may give help you
during a dangerous situation / emergency descent and the treadmill
stops.
STEP 4:
Transportation the treadmill
1. Turn off the treadmill and disconnect the power cord from
treadmill.
2. Only lift the treadmill at the rear end until the treadmill stands on
the front transport rollers (44) and it is easy to move.
Attention:
Before folding the treadmill, switch off the treadmill and wait until the
surface fully stops.
STEP 5:
Checks and How to start
1. When everything is in order, connect the power supply cable (57)
with wall power (220-240V~50-60Hz) and socket on the main switch
(46) below the front frame.
2. Put the safety key (15) onto the right handgrip (43R) and the com-
puter will show normal manual mode. Carefully remove the protective
film from the display. Put the safety clip (15) at your exercising cloth
and stand on the side rails (26+36).
3. Insert the battery into the remote control (53), observing the pola-
rity. Press „ "-button and after a 3 sec. Count Down the treadmill start
moving. Start walking onto the walk surface (34) when speed is slow-
ly and follow the speed. Familiarize yourself with the machine at low
speed settings. Run in the middle of the running surface (34) and hold
balance by using handgrips (43) if you feel insecure. Don't step on the
side foot rails (26+36). Only run with look at the computer (1) on the
treadmill during exercising. In emergency case, step of the treadmill la-
teral and hold at handgrip (43).
Note:
Please keep the instructions in a safe place as it may be required for re-
pairs or spare parts orders becoming necessary later.
43
26
34
36
11
51
43
21
53
43L
1
57
GB
44
15
43R
46

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

20302030a

Inhaltsverzeichnis