Replacing The Joystick Assembly - NAMCO WORLD KICKS Bedienungsanleitung

8-6

Replacing the Joystick Assembly

Note: The Joystick Assembly connecting cable is very short. Take care not to strain
the cable when removeing the Joystick Assembly.
1. Remove 4off security screw (M5x25), lift the Joystick assembly slightly and tilt the
assembly backwards.
Security screw
(M5x25)
Horizontal direction
Lift up slightly
potentiometer
Page 67
Tilt backwards
Security screw
(M5x25)
Joystick cover