Replacing The Start Lamp / Switch - NAMCO Aim for Cash Handbuch

8-2

Replacing the Start Lamp / Switch

1. Remove the Play Panel.
2. To remove the Microswitch, disengage the lug of the long retaining arm from the
switch, lift the front of the switch up, and remove from the switch holder.
Long retaining arm
3. To replace the lamp, twist the Lamp/Switch assy counterclockwise and remove
from the Switch Body. Remove the lamp by pulling it straight out from the Lamp
Holder
4. Reassemble in reverse order.
Note: When replacing the Switch assembly, ensure that it is fully located into the
Switch body.
(see 8-1 page 54)
Page 55
Microswitch
Lug