Setting The Time - Eterna EMC 3510 Bedienungsanleitung

2.4

SETTING THE TIME

CROWN
Pull the crown
seconds hand
to position the hands to the desired time. When the hour
hand passes the 12 o'clock position, you will see whether
it is indicating midnight (the date changes) or midday
(the date does not change). Then push the crown
in against the case to the rest position A. The central se-
conds hand 3 will restart.
NOTE
For a time setting accurate to the second, we re-
commend pulling the crown out to position
when the central seconds hand
o'clock, and pushing it back in to synchronise with
an official time signal.
6 PULLED OUT TO POSITION
6 out one notche to position B. The central
3 will stop. Turn the crown either direction
6 6
B
6 back
3 is at precisely 12
B