Operating The Monitor - iiyama Vision Master 1403 LS704U Bedienungsanleitung

OPERATING THE MONITOR

To create the best picture, your iiyama Vision Master has been preset at the factory with the signal
timings listed on page 13 in PRESET MODES. If an incorrect picture appears during the operation,
adjust the image by following the procedure below to get the desired picture.
(
Main Menu appears on the screen when you press the Menu Button.
B
For example, to adjust the vertical position, select
on the Main Menu by using the +/– Buttons.
Adjustment icon
Adjustment menu
presently selected
The line shows the
progress of the
adjustment being
made.
C
An adjustment scale will turn red when you press the Menu Button.
U s e t h e + / – B u t t o n s t o a d j u s t t h e v e r t i c a l p o s i t i o n . S e e
A D J U S T M E N T M E N U C O N T E N T S o n n e x t p a g e f o r f u r t h e r
information.
NOTE
n
The On Screen Display disappears several seconds after you stop pressing the buttons while
performing an adjustment. Any changes are automatically saved in the memory when the On
Screen Display disappears. Turning off the power should be avoided while using the Menu.
n
Adjustments for Size, Position, Pincushion, Trapezoid, Pin Balance, Parallelogram and Moire are
saved for each signal timing. Except for these adjustments, all other adjustments such as Contrast,
Brightness, Color and Rotation have only one setting which applies to all signal timings.
8 OPERATING THE MONITOR
H: 68.8KHz
V-Center
70
9300 6500
(V-Center)
V: 85Hz