Seite 1
Aufbauanleitung / assembly instructions mod. 1132 M8 x 30 SW13 8x M8 30 x 10,5 1. Montagematerial 2. Den Oberbau auspacken und umgedreht auf 1. fitting material gepolsterten Montageböcken ablegen. Die Auszüge etwa 50 mm herausziehen. 2. Unpack the table-base and put it upside down onto padded assembling trestles.
Seite 2
7. Make sure that red dots on the main glass and on one extension-glass are on one side, while taking the main glass onto the base. The 4 metals of the main glass must stick into the aluminium-sockets of the base. 2 / 4 1132 Änderungsdatum: 14.04.16...
Seite 3
9. Adjust the hight of the main glass by turning the 4 aluminium-sockets until the hight of main glass and the extension glasses are on one level. 10. Fertiger Tisch. 11. Fertiger Tisch, ausgezogen. 10. Finished table. 11. Finished table, pulled out. 3 / 4 1132 Änderungsdatum: 14.04.16...
Seite 4
And the extension might stuck while raising. Please oil the metal arms of the extensions after a while to archieve a better raising function of the extension. 4 / 4 1132 Änderungsdatum: 14.04.16...