Software Installation Guide; System Requirements; Plug & Play; Maintenance Instructions - Weidmuller EPG 60 Originalbetriebsanleitung

CAUTION
Keep any body parts away from the danger area between the crimping insert
half-pieces.
Make sure that no persons are present in the vicinity of the working area.
Safe standstill of the EPG 60 Power Tool is ensured only when the crimping
head is fully open and the battery is removed.
Prior to any change of the crimping head half-pieces, always remove the battery from
the power tool.

3.5. Software installation guide

3.5.1 System requirements

To install the software, a PC with the following minimum requirements must be available::
Operating system
CPU
RAM
HDD
Display resolution
Other
3.5.2 Plug & Play
After successful installation of the supplied software, the EPG 60 Power Tool will be recognized
automatically by your computer and you can update your programs or data.
Please find detailed installation instructions on the supplied CD­ROM.
4.

Maintenance instructions

The EPG 60 Power Tool is basically maintenence-free. You should clean the crimping head
after each use and grease the pins at regular intervals. It is important to protect both battery and
charger from moisture and/or foreign objects.
To ensure correct application and a long service life, observe the service intervals specified for
your power tool.
32
Windows 7, 8, 10
Pentium 4 processor, running at a minimum of 1.7 GHz
512 MB or more (1 GB or more is recommended)
200 MB RAM (1 GB recommended)
1024 x 768 or higher, 65.535 or more colors
CD-ROM drive, USB 2.0
2515710000/00/04.2017