Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GSR 6-25 TE Professional Originalbetriebsanleitung

OBJ_BUCH-137-008.book Page 12 Wednesday, March 11, 2015 10:42 AM
12 | English

Technical Data

Screwdriver
Article number
Rated power input
Output power
No-load speed
Rated speed
Tool holder
Max. screw dia.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to EN 60745-2-1.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined
h
according to EN 60745:
Screwdriving without impact:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards:
EN 60745-1, EN 60745-2-1, EN 60745-2-2.
2 609 932 926 | (11.3.15)
GSR 6-25 TE GSR 6-45 TE
3 601 D45 0.. 3 601 D45 1..
W 701
W 327
-1
min 0–2500
-1
min 0–1700
¼" hexagon socket ¼" hexagon socket
mm 6
kg 1.5
/II
3 601 ...
dB(A)
dB(A)
dB(A)
2
m/s
2
m/s
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen
GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
10.12.2014
Assembly
Changing the Tool (see figure A)
 Before any work on the machine itself, pull the mains
plug.
Pull off the screwing-depth stop 4 toward the front. Pull out
the screwdriver bit 1. If required, the universal bit holder 10
can also be pulled off and replaced.
After changing the tool, reattach the screwing-depth stop 4.
GSR 6-60 TE
3 601 D45 2..
701 701
327 327
0–4500 0–6000
0–3000 0–4500
¼" hexagon socket
6 6
1.4 1.4
/II /II
D45 0.. D45 1.. D45 2..
81 79 81
92 90 92
3 3 3
<2.5 <2.5 3.3
1.5 1.5 1.5
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools