White balancing
Back light compensation:
Gain control (AGC)
Light Adjustment (IR SMART)
HARDWARE FEATURES
No. of IR LEDs / Lighting distance
(m)
Audio Inputs / Outputs
Alarm Inputs / Outputs
Important note:
Product specifications may be subject to change without prior notice.
ACCESSORIES PROVIDED
N°1 guide pattern (drilling template).
•
N°1 Allen wrench
•
Instruction manual.
•
Important note: Accessories may be changed without prior notice.
INSTALLATION SPECIFICATIONS
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
•
off. The subject must not be backlit.
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
•
device to the mains.
INSTALLATION PRECAUTIONS
Though the device has an IP66 protection grade, there are particular environments (such as
•
seashores, harbours, wharves, etc.) that can accelerate corrosion of external parts. Also installation in
very dusty environments (quarries, mines, dusty materials, etc.) can compromise the optimal
operation.
To prevent device overheating, place it in a well aired position.
•
For the same reason, the device must not be installed near heat sources as radiators or warm air
•
ducts, in places where it is directly exposed to sun irradiation or in rooms with excessive dust
accumulation, subject to mechanical vibrations or impacts.
Consider the device operating temperature range (0°C÷+50°C) before choosing the place for
•
installation. Do not install the unit over another heating device.
Do not power the device on immediately after moving it from a cold place to a warm one and vice
•
versa. As a general rule, wait for three hours: the device needs this time to adapt to a new
environment (temperature, humidity, etc.).
14
ATW/AWC-SET/INDOOR/OUTDOOR/MANUAL
OFF / BLC / HLC
YES
YES
16pcs(SMD)/ 15m IR ON
NO
NO
DS1096-111