Technical Specification - urmet 1096/303 Bedienungsanleitung

ENGLISH
PRECAUTIONS
Make sure that the device is intact after removing it from the package.
•
Disconnect the device from the mains before cleaning or maintenance. Do not use spray products to
•
clean the device.
Check that the working temperature is within the indicated range and that the environment is not
•
particularly humid.
Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.
•
The device can only be opened by qualified technical personnel.
•
Exclusively contact an authorised service centre for repairs.
•

TECHNICAL SPECIFICATION

GENERAL DATA
Max absorption
Power supply
Dimensions (L x D ∅)
Weight (g)
Type of case
Product Colour
Operating Conditions
Protection Class
MAIN FEATURES
Camera sensor
Camera lens
Electronic shutter (s)
Sensitivity (lux)
IR filter
Video resolution (H x V)
S/N ratio
Motion detection with PIR
PIR Detection Distance (metres)
PIR Detection Angle
FUNCTIONS
Synchronization
Exposure
OSD
DNR control
Wide Dynamic Range (WDR dB)
DS1096-111
190mA with IR ON
12 Vcc
97x100 mm
390 g
Dome
Total white
-20 - 50°C
IP66
1/2.9" 2MPX CMOS High Definition
Lens f3.6mm fixed
1/25 ~ 1/50.000 auto
0.01lux@F1.0(AGC ON)
0Lux with IR ON
Mechanical with auto switch
1920x1080@25fps;
CVBS Resolution (PAL) 720 TVL 960H@50fps
>48dB
YES
7m
120°
Internal
Auto
YES
2DNR - BLC
Digital
13