Herunterladen Inhalt Inhalt Diese Seite drucken

Black & Decker KC8482C Bedienungsanleitung Seite 6

10mm akku-bohrschlagbohr
Vorschau ausblenden Andere Handbücher für KC8482C:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Drilling in masonry
Use carbide tipped masonry bits at high speeds.
Keep an even force on the drill but not so much that
brittle materials crack. A smooth, even flow of dust
indicates the proper drilling rate.
Screw lubricants
In some instances it may be to your advantage to
use a lubricant to make a screw drive a little easier.
Two common lubricants are a bar of soap and dish
washing liquid. Just put a little on the screw threads
for easy driving.
Cleaning and lubrication
Use only mild soap and a damp cloth to clean
the tool. Do not use petrol, turpentine, lacquer
or paint thinner, dry cleaning fluids or
similar products.
Never let any liquid get inside the tool.
Never immerse any part of the tool in liquid.
Self lubricating bearings are used in the tool and
periodic relubrication is not required.
In the unlikely event that your drill/driver should
ever require service, take or send it to your local
Black & Decker service centre.
Accessories
Black & Decker offer a complete range of screwdriver
bits. We recommend that Black & Decker
accessories are used. Please consult your local
Black & Decker dealer or service centre for details.
Rechargeable batteries and the
environment
Black & Decker cordless tools use nickel
cadmium (NiCad) batteries or battery packs
which can be charged many times to give
long life and repeatedly full power.
This symbol indicates the NiCad batteries
contained within this unit must be disposed
of properly and not discarded in everyday
Cd
household waste which may be disposed of
in an incinerator or landfill site.
NiCad batteries can be harmful to the
environment and can explode when exposed
to fire. Do not incinerate.
Therefore, when your tool or battery pack
needs replacing, think of the protection of
our environment.
ENGLISH
Black & Decker recommends the following:
Discharge batteries completely by
running the unit until the energy is
completely discharged and then remove
from the tool.
Take the battery pack to a Black & Decker
service centre, your local dealer or your
local recycling station. If necessary,
contact your local council for disposal
information. The collected batteries will
be disposed of properly and/or used for
recycling purposes whilst protecting
the environment.
Note: You as a customer are responsible
for proper disposal or recycling of the
battery pack.
Black & Decker after sales service
All Black & Decker products are scrupulously tested
before leaving the factory. However, in the case of
your power tool being defective, please take it to
your nearest Black & Decker service centre. All DIY
and gardening products, as well as the fittings we
recommend, are guaranteed for 12 months parts
and labour.
Guarantee
If a Black & Decker product becomes defective
due to faulty materials or workmanship during the
guarantee period following purchase, we guarantee
to repair it free of charge, provided that:
The product has not been misused.
Repairs have not been attempted by persons
other than our own service staff or the staff or
authorised repairers.
Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is
additional to consumers' statutory rights.
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kc9682cKc8462cKc9662cKc8402cKc1282cKc8452c

Inhaltsverzeichnis