Velleman CS5MXP Bedienungsanleitung Seite 2

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to
a specialized company for recycling. This device should be returned to your distributor or to a local
recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, do not install or use it and contact your dealer.
1. Assemble and adjust for length (Twist surplus lead around stem)
2. Insert batteries
3. Set DISC 1 (top right) to ALL METAL (fully anticlockwise).
4. Set DISC 2 (bottom far right) to 5.
5. Set SENSITIVITY (top left) to 3 o'clock position.
6. Push BATT CHECK down and hold to indicate battery condition. Good batteries will be in the green area on
the meter. Release.
7. Set BOOST to NORMAL.
You are now in ALL METAL MOTION MODE.
You will find all metals within the search head range including iron and trash PROVIDING THE SEARCH HEAD IS
MOVING OVER THE TARGET (Not stationary).
To ignore these low value metals :
8. Adjust DISC 1 (top right) to position 5.
You are now in DISCRIMINATING MOTION MODE.
The other modes requires more detailed explanation acquired from reading the full instructions.
IF A PROBLEM IS ENCOUNTERED REFER TO FULL INSTRUCTIONS
CS5MXP
ENGLISH
- 2 - VELLEMAN