Makita DDA341 Bedienungsanleitung Seite 3

ENGLISH (Original instructions)
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
SPECIFICATIONS
Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Explanation of general view
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch
7-1. Sleeve
Model
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
) : 73 dB (A)
pA
2
) : 2.5 m/s or less
h,D
2
DDA341
10 mm
25 mm
0 - 1,700
326 mm
1.7 kg
D.C. 14.4 V
ENE032-1
For European countries only
EC Declaration of Conformity
ENG104-1
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Drill
Model No./ Type: DDA341, DDA351
are of series production and
Conforms to the following European Directives:
2006/42/EC
ENG202-3
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
ENG901-1
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
000230
3
8-1. Groove
8-2. Hook
8-3. Screw
Corporation as
30.1.2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
DDA351
10 mm
25 mm
0 - 1,800
326 mm
1.8 kg
D.C. 18 V
ENH101-15
the responsible